Locate us


Analysis of hydro-abrasive erosion in a high-head Pelton turbine injector using a Eulerian …

Chinnar SHEP Project
This article aims to describe the model testing carried out at Hydraulic Turbine R&D Laboratory.

Dhakrani RMU Project
This article aims to describe the model testing carried out by Jaberg and Partner GmbH.

Evaluation of uncertainty in flow and performance parameters in Francis Turbine Test Rig.

Prediction and analysis of the cavitation performance of a Francis Turbine under different loads.

Sarbari II Project
This article aims at analyzing the transient condition in water conductor system of hydro-power …

Ngoi Hut 2 Project
This article aims to describe the model testing carried out at CKD Blansko Engineering (CBE) R&D facilities in Blansko, Checz Republic, for the Ngoi Hut 2 Project.

3D Power House Layout
The main functions of the power house are to support and house the generating units and their accessories as well as the water passages.

Transient Calculation Software
In a closed conduit, when the flow is unsteady that is the discharge at each section is varying rapidly from one instant to the next, sudden pressure changes occur inside …

Ngoi Phat Expansion Project
This article aims at describing the challenging design of Pelton Turbine for the Ngoi Phat Project in Vietnam. The turbine delivered is part of …

Pa Hu Project
This article aims at describing the sturdy design of High Output Horizontal Francis turbine for the PA HU Project in Vietnam.

Sholayar R&M Project
This article aims to describe the model testing carried out at Vattenfall AB R&D facilities in Älvkarleby, Sweden, for the …

Regulation Valves
These valves are special devices designed for regulating Pressure and Flow Rate of water. The valves used for this purpose are commonly known as ‘PRV’.

Omokawa Project
This article aims at describing the special application of electrical actuators in the Francis turbine for the OMOKAWA Project. OMOKAWA is owned by Yamanashi …

Nilwande Project 
The NILWANDE HPP is equipped with two (2) units of Kaplan machines running at synchronous speed of 428.6 rpm, operating under rated net head of 38.5 m.

Power Generation Optimization (PGO) is a “SCADA” solution developed by FLOVEL to control the machines, which helps to increase the overall efficiency …

PGO Desk
PGO Desk is an extension development on PGO. PGO Desk can be utilized by customers in their office. It helps with real time monitoring of plant data …

Gateway Solution
It is a “Gateway Solution” developed by FLOVEL to communicate with “Load Dispatch Centre (LDC)”. This solution can be used worldwide, where load dispatch centre …

3D Computer-Aided Design (CAD)
FLOVEL is committed with faster gestation period of projects and we can deliver the equipment design and specifications in a very short schedule. To make it possible …

Finite Element Method (FEM)
Safety and reliability of our equipment comes first. That is why FLOVEL’s Design & Engineering use the Finite Element Method (FEM) tools for calculating stresses …

Bearing Calculation Software
FLOVEL’s Design & Engineering team is equipped with Dyrobes’ BePerf bearing calculation software.
Read more about this software and make up your own mind.


Nuestro principio es estar cerca del cliente: en todo momento y en cualquier parte.


FLOVEL Energy Private Limited
Vatika Mindscapes,
Suite 101-A, Tower-B,
12/3, Mathura Road,
Faridabad – 121 003,
Haryana, INDIA
Fax: +91 129 4090650